I just put the new MAP Enhancer in.

The wait is over and I've got the new Enhancer in place. I asked for and received the following instruction on how to set up the City side of the Enhancer: When connecting the Enhancer be sure the dials are set to "0". Once you have it installed, turn the lower switch to "Enhanced" and the upper switch to "City". Then slowly turn the "City" dial until your engine starts to sputter, then turn the dial back 1/4 turn. I expect that this will come in handy for anyone going down this path.

ADDED NEXT DAY: I also asked for and received the following information on how to set the Highway side of the Enhancer: The Highway setting is for speeds above 40 mph. Match the HWY Dial to your City setting. After reaching a speed of 40 mph, switch to your dial to HWY and lean it out until your comfortable with your setting. Be careful and do this slowly. You don't want your engine to die at that speed. Also remember, when you want to pass or go up a steep incline, switch your lower switch to Factory so you will have all the power you need. Good info for all.

As I said in the last post I waited to fill up until I got the new gadget, so here are the results - as you can see I didn't do as badly as I'd expected since this works out to 22.9 MPG - (lets call it 23 why don't we) which is nearly couple of miles-per beyond my norm. This was obtained with the Oxygen Sensor Spacer installed as well as the HHO Generator. I suppose if I'd done the battery trick I would have done even better. It just occurred to me, (as I wrote that last line) that I didn't do it when I did the install - so I promise to go out and do it in a little while so that everything starts from an even base.

Wish me luck since my luck will also be yours...

Waiting waiting waiting

Today I waited all day long to receive my replacement MAP Enhancer. The Post Office taunts me with their insane tracking method which lets me know that it has arrived in the local station. Yet, I still do not have it! (See me thrumming my fingers on the desk.) Tomorrow is the day. (One can only hope.) Once I have it installed I'll put gas in my half full tank and report the results of having the Electrolyzer and the Oxygen Sensor Spacer in place. My hopes are not high. I did not bother to reset the computer with the disconnect the battery trick. Figured to do that when I put in the new Enhancer. On the other hand, one of my clients gave me new trick (you know who you are but I've forgotten - please write in as a comment to identify yourself - and I'll inform the readers of your ability to provide awesome information). Instead of pulling the the negative cable and leaving it off for 20 to 30 minutes - pull both cables off and touch them together. Reportedly it will do the same reset without the wait. Now, that's great... Thanks to that guy from all of us...