Something New Has Been Added - 45+MPG!

Well as many of you have figured out by now - I haven't been around here for a while. Such is life:-) However my fascination with obtaining the best possible mileage has not diminished at all, in fact I have been carefully keeping track of the mileage that I've been getting (or not getting) on my new 2008 Honda. The car is rated at 35 highway and 26 in the city, but the reality is that I've been getting around 17 in the city and 27 on the highway. Naturally, I've been complaining to Honda about this for the entire past year and they've been telling me that their computers verify that the car is running perfectly. I felt I was getting the run around and I said so. Finally, the service manager, Antony at Paragon Honda agreed with me that the car should be road-tested by his best technician, Ken. We arranged a time, and because it took a month to do this I thought I was being stalled - but I went along with it so that I could at least get it done.

So two days ago Ken and I got into the car, went together to a gas station and filled it up. At that point he said that the driving conditions were that all accessories had to be turned off and that the windows had to be rolled up. I said no problem. We drove approximately 50 miles (about 10 on city streets and 40 on the highway) - all the while obeying the speed limits. I was vigilant in keeping track of when and where the miles were being racked up - figuring that staying on the highway longer was certain to slant things in their favor, but still I was okay with that since I figured that the best he would be able to do would be at the very most - 29 on the highway and possibly 20 in the city - if he coasted a lot...

When we returned to the gas station and filled the car once again to measure the mileage I'm sure that my mouth fell open - we got 45+MPG on that little trip! He explained to me that the aerodynamics of the car with the windows up were responsible for a lot of that difference, and that leaving the AC off in particular assured that the Alternator did not kick in. Naturally, the Alternator creates drag on the engine.

It was 80 degrees out and with the windows up it was damned hot in that car, but that he was able to prove to me without a doubt that the car could actually do much better than advertised was stunning. His driving was not all that different from the way I drive normally - trying to stay below 2000 RPM and not revving the engine etc., but still he got that impressive mileage in my car.

Should Honda and other car makers be telling us that in order to get superior mileage, as stated on the sticker, we need to travel around in a well appointed sweat-boxes, with the windows up and using none of the gadgets installed by them? Yes, of course they should! Will they ever do such a thing? Hell no, it would be bad for business - right? Is this a scam? No not at all: it is simply a lie by omission designed by ad agencies to sell cars. As long as we continue to buy the lie we are as responsible for the problem as they are.

Fight back by continuing the search for a better way, better mileage, and a better life for us and our children. If we don't do it we can be certain of one thing - the corporations won't do it either.

Placing the Angle Fittings On the Cap

The image on the right is the inside of the cap for the wide mouth jar. Specifically, you're looking at a double vacuum set up where I used lock-washers to hold the angled fittings in place. As you'll see in the video below they're not always easy to put in place, but I found them to be more practical and frankly easier to use than the 1/4 inch nuts as indicated in the book.

UPDATE NOTE: 7:42 PM EDT Aug 10, 2008 - A new friend of mine in Fort Worth just called to tell me that the 1/4 inch lock washer slid right off the elbow! Between us we figured out that the elbow he was using was an irrigation variety purchased from Home Depot. The elbows that I'm using are automotive vacuum fittings and can be found at PepBoys, NAPA and Auto Zone. It's a pretty darned important distinction. Thanks Chris! - j

The video should give you a pretty good idea of how to put the angled fittings into the cap. I've had the question asked quite a few times concerning how this is done, and I finally got it through my head that there was a need for a video. The photo is actually something that I took a couple of weeks ago and has been lost in my computer until now.

It has lately occurred to me that what I take for granted is not necessarily obvious - so I ask in advance for you to be patient. If I've neglected to point out something important just drop me a note or give me a call and I'll see what I can do to fix it properly

NOTE: The O-Ring mentioned in the video is now available.

Very soon I'm going to be making further modifications to my car in the quest for better mileage. Someone early on told me that I should be getting 70MPG on the highway, and I just figured that he was exaggerating - that he was all hot about selling the technology and had become what I call a cheerleader (if you know what I mean), however as you know I'm now getting very close to 40 MPG on the highway - and it was only scant weeks ago that I thought that was impossible. Hey I haven't tried the PVC Enhancer; the Fuel Heater or any gas additives. I've been running with my AC on. I'm not all that careful with my starts and stops, and I sometimes wait for my wife or my kid with the motor running and the AC on at the same time! Get it? I have room to grow and new things to explore. However the AC stays on. I like to be cool:-)

My current w4g set up is as follows:

Two (Single Vacuum Line Style) Electrolyzers connected in series

• No line to the Air intake
• No Vacuum Line Check Valves - (with four feet of vacuum line going to the manifold)
  
• 1 1/4 teaspoon Baking Soda in each
• Each Tower has 1/4 inch notching - (accepting longer wire for more surface area)
  
• Positive Side wire - 60 inches - quadruple twisted 316 L
• Negative side wire - 60 inches - double twisted 316L

MAP Enhancer

• Pots set at approximately 10 on a scale that runs to 60

Oxygen Sensor

• Formerly had a spacer on it which gave some benefit when no other enhancements were in place
  
• IMPORTANT: Has now been disconnected from the system. - It was found to be in conflict with the MAP Enhancer.
  

Later,

j

On the Road Again

Well yesterday was the big day. I installed the newest of the new MAP Enhancer's and took the opportunity to essentially start all over again with my set up. The first thing I did was to pull the negative cable from the battery so that the computer could reset while I worked on everything. Although I have mentioned that I've been told that removing both cables and touching them together would do the same trick - I figure that since I have the time to use the tried and true "traditional" method - why not?

The phenomenon of the nearly magnetic attraction of this technology became apparent within about 4 minutes of the time I popped the hood - I was joined by three guys, a woman and a Cocker Spaniel from the neighborhood. Everyone wants to know what's going on with the gadgets in my car. Of course this comes along with people who think that they know stuff like how to connect wires. I had to explain several times to one of my pals that I was connecting the two units in series, and that I really meant to do it that way...-)

The image above shows the new installation in action. That little crate thing I put the Electrolyzers in came from the Dollar Store (although it cost like $3.00) and gave them a pretty stable platform to put them on after I took a pair of cutters to it to give me room for the air intake duct leading to my injector. I'm placing another closeup image here since I'm pretty proud of myself at this moment. You'll see lots of indications showing the Positive and Negative terminals since I didn't happen to have any red and black paint around (not that it did me all that much good when I had it before.

Here's a hint about putting the angle fitting(s) in the cap to accept the vacuum line(s): each end of the fitting has a kind of lip or barb around the edge making it very difficult to push through the hole. So take a pair of shears or a wire cutter and cut just above that lip and then push it through the hole. Ozzie's books show that a 1/4 inch nut is twisted down over that inner piece sticking downward through the cap. I found it much better to use a lock washer for the purpose to holding it firmly in place before sealing with Goop.

I must admit that felt exceptionally confident with what I was doing this time around in that I personally built my Electrolyzers. Not only that, but these Electrolyzers contain laser-cut and notched towers that I personally designed, 316L wire that I personally braided and lovingly wrapped on each one, and the laser-cut caps topping everything off were those that I produced as well. Each item attached to the cap was one that I personally attached and sealed with Goop. What I am saying here is that I know that these are exactly what they need to be. I am not relying on anyone else for the physical condition of these Electrolyzers. Why is that important to me? Have you read the earlier posts in this blog? Everything is important. Each small component, each procedure, each element is meant to be perfect in its own way. Does this mean that I can't goof? Again, I ask if you've read earlier posts:-) The thing is that I do learn from my mistakes. The last one cost me $60.00 and it was worth every nickel. If it had cost me $6000.00 I must admit I might feel differently. Nevertheless my lesson has been learned and I know to be careful with each and every part. The information in the Water4Gas books is meant to be our guide, but I'm pretty sure that I can't be the only one who thinks that I can go along and easily do what's been described, but doing it my own way (an example of this is that I tried other glues in place of Goop. Just FYI Gorilla Glue and Silicone do not work properly as sealers) and expect to get the described results. It's in my nature to explore the boundaries and expand beyond what I already know. The truth however is that it's important for me to know the basics before I move ahead with my brilliant ideas. Ozzie has provided an amazing blueprint for us, but that's a jumping off point and we all know it. My issue generally stems from thinking that I know everything before I really know it. Still all in all I'm having a blast. The progress I've made in understanding how my car works and what certain things are supposed to do is remarkable in just two months - especially considering that when I put my first Electrolyzer in the car I had to as my mechanic what the vacuum lines looked like. So far so good.

I'm going to head out and fill the tank so that I can get an accurate measurement on the results.

A Frank Analysis of The Problem

As it happens I have somehow been elected to represent all of those people who charge forward and get things wrong, and make mistakes, and have a need to find out how to come back from barriers that on the surface - point to failure, but on re-examination point to a greater wealth of knowledge than could be gained without the problem... (Unless of course someone else has done it for you:-) Anyway, I now know that the problem that I experienced the other day had nothing to do with the new MAP Enhancer. In that light I've created another of my little videos that shows pretty clearly what I did, where I went wrong, and obviously - what not to do.

Even though I now know the source of the problem I've not completely solved everything related to it. I know that the short in the system originally took place in the Electrolyzer, and I've made the correction by replacing it altogether, however somehow that short affected my Air Conditioner, and as I investigated further before finding the problem - has now caused additional problems with my radio. - I've scheduled an appointment with my mechanic tomorrow morning. Hopefully, it's not huge -but really I have no idea on what his findings will be. (I know that you all have your fingers crossed for me.) With any luck it will cost me enough to make me overly cautious in the future, but not so much that I'm freaking out.

BTW - you heard it right in the video - the melting temperature of Plexiglas is 270 F.

Also I want to mention one other thing here: one of my customers, a man I would now consider as a friend, Alan was doing a bit of experimenting one day last week, and came across something very important. He attached an Electrolyzer to a 12 volt battery, and fortunately for everyone involved - left it in the corner of his barn, and walked away from it intending to leave it on all night to see if it would continue to pump out HHO. When he returned a few hours later he discovered that it had BLOWN UP! - Never, never, never connect the Electrolyzer without having the generated gas drawn off by a vacuum. Alan made this mistake for the rest of us. We owe him our sincere thanks. Please don't duplicate it. Stay safe.

I spoke with someone yesterday who is very knowledgeable in this area, and he mentioned something else very important to all of us, and that is that right now this community is sort of flying under the radar, but if it ever occurs that there is a really bad accident involving HHO and water4gas - that flight will be over. I encourage everyone to be extremely careful - don't play with HHO gas anymore than you would play with a live high voltage electrical line.

'Nuff said, right? Now, let's go change the world.

Latest Mileage and Other Interesting Stuff

Well it's been a busy week and I'm finally getting around to updating my progress, and I want to state for the record - that it is indeed progress. Oh sure I've been boohooing about how I want consistency and high numbers and it finally got through to me that, at this point, I am getting the consistency part of the equation - 23.3 is a consistent gain of 2 extra miles that I'm getting from each gallon of gas. Correct - it's not huge, but it is after all there.

So what's missing? I have the MAP Enhancer doing it's job; the Oxygen Spacer is in place, a new Electrolyzer has been added. I've been told that adding more baking soda is the next step to take (short of putting in a second Electrolyzer) in getting more HHO from my single unit. Other people warn me that if I use too much baking soda I might melt the tower. - To address that issue at least: one thing is easy to look up online, and that is the melting temperature of Plexiglas. That process happens at 270 degrees Fahrenheit. If I begin to generate that kind of temperature there's one thing that will happen long before the Plexiglas melts: all the water would boil away. Clearly, the melting of the plastic is not an issue. I just added another half teaspoon. We'll see what happens. Also it has been suggested to me that the check valve in my line going to the manifold could be removed to allow a greater flow of HHO. I do have a four foot vacuum line there so I'm pretty clear that there's no danger of getting a spark kicked back into the Electrolyzer, but I'm gong to ask around some more to make very sure about that before I do it. It does make a certain kind of sense after all, but my wife would be pretty angry with me if I blew up the car.-)

There are all kinds of people now letting their creative juices flow - making all kinds of new units. Some of them are pretty interesting - composed of rods and plates, some are larger, and are constructed of new materials. Some are touted as more powerful (and maybe they are), but the one thing that I know for sure is that the original technology, as described in great detail complete with do-it-yourself plans - works. This is where we all must begin to gain a greater understanding of what it is we're dealing with. Harnessing it and playing with it and experimenting with it are exactly the kinds of things that need to be done to lead us all to the next step. Not so many months ago if someone had asked me if water could be ignited I would have laughed at the ridiculous nature of the question. Now that concept is the source of the name of my website. It is the nature of the device that I have added to my car that is without question improving my mileage. The idea that water can, and does, burn is now an obvious truth.

This ongoing exploration and expansion of our technology (something that should have been done over the last 50 years by large automakers), is taking us into a world that has been described by one of my new friends in the water4gas community, Stephanie, as a Silent Storm. We are that storm. We are, as a community of seekers, individually extracting ourselves, our friends, our neighbors, and ultimately our customers from the clutches of Big Oil. Not all at once but a step at a time. Many of us are looking to have this happen within an underlying framework of integrity. Treating one another as fellow travelers rather than competitors we will change more than just the way we fuel our automobiles. We could change the world. It is possible. Certainly as possible as burning water. We are not large corporate entities who have no responsibility to any but their stockholders. We are just people who care about what happens to others. If we each adhere to the truth, as we know it, and keep telling it as long as we know it, and continue to explore how what we're doing can transform the planet into what it was meant to be all all along - we will certainly find that we are doing exactly the right thing at exactly the right moment in time.

To misquote Lao Tzu for my own purposes, "Every journey begins with a single step." Well my friends I believe that we have taken it.

Changed Out the Original Electrolyzer

As you can see I've laid these two towers side by side to compare the differences. Naturally, the one on the right is the one that I built and wrapped, and this photo was taken before I installed it in the car. So it's obvious that it is perfectly clean and has no residue on it. The other - is the one that's been in my car for a bit longer than a month and yes it's nasty looking, but more than that - now that I know what I'm actually looking at: there are very few winds of the electrode wire and worse than that I notice that the negative wire is beginning to rust! This means that this wire is not 316L stainless steel. This means that what I've had sort of working in my car was not made properly and was not made using quality materials. I will not divulge the name of the person who sold it to me, rather I will simply encourage everyone to use the best materials and to treat others in the water4gas community as though they were members of your family. This is not only about the integrity of the product - it is also about allowing people to have the best possible experience as they begin to explore this technology. Let's not discourage others through a greater desire to make money than to have people know that this really works.

When my MAP Sensor Enhancer was not working I could not know until Mr Minton informed me of what had happened. The reality that my electrolyzer in all probability has never worked properly is something I had to discover for myself. If I were not moving along in my quest for understanding I might not have made the discovery. I might have gotten discouraged and even given up never knowing that I was so close.

Anyway the new electolyzer is in the car. All of the areas where it might leak (sucking air through the lid or around the electrical posts) have been carefully sealed. I switched out the universal vacuum fitting for a fitting that exactly fits my hoses. The one thing that I've not yet figured out is how much baking soda to use in the electrolyzer with so many more windings. I will find out and report back here.

One other thing: As soon as I put the new Electrolyzer I went ahead and refilled the tank so that I'd be getting a more accurate measurement for the next posting. It amount that I put in was insignificant and I did not recored that mileage.

Also I just put up the new website www.ignitingwater.com where I am selling support products for water4gas.

Mileage report with the new Enhancer

I'm in that spot again. I want to talk about the incredibly great mileage that I'm getting now that I have placed all of my ducks in a row, however I can't do it! Sure, 23.6 MPG is better than I was doing, but let's face it - I've seen 26. I want 26 again. I want 40!

As most of you must know by now I am fairly persistent, and I'll not let this go until I get what I want. There are certainly enough of you now encouraging me, and telling me that it is possible. Telling me about your Toyota getting mileage that I only dream about. - Thanks a lot. No really, all kidding aside - thank you all.

My thought as I sit here writing this is that I'll go back to the Electrolyzer and put in a new tower with my own windings on it - In the last day I've started producing and selling 1/4" thick towers with notches at the 1/4" so there are nearly twice as many windings apparently producing twice as much HHO so that my car can run leaner. (Thanks to Rod and Steph for cluing me into new info from Ozzie) I expect that I'll have time to do that on Monday.

I feel that I should mention this: The Electrolyzer that I have on my car is not one of the one's that I've made. Rather it is the original one that I bought as a completed item (it has glue on the coils which is obviously something I personally identified as a problem. "Why then," you ask with a look of stunned amazement at my stupidity, "didn't you put one of your own creations on?" - It's a damned good question. I suppose the only real answer is - that I got caught up in the fact that it has worked in the past, and I've been busy: the sales of the towers have taken up a surprising amount of time. More to the point - it didn't occur to me that it might not be delivering the amount of HHO that my car actually needs. (Although that leaves me wondering why it did what it did in the first place.) Nevertheless, I'm now about to remedy that situation.

The way things stand at the moment is that I am in the midst of an experiment, and as it happens I am one of the factors in that experiment. I may well have done something wrong (though I have no idea what) - it might not be my influence at all. I will find out and hopefully this excursion of mine will assist the rest of you.

So one more time I've taken another step. At least it's not a step backward as some others have been, and it's even a slight move forward. Bottom line: I want a giant step forward. Don't we all?

Also I want to add a quick note about the towers: one of my clients let me know that when he was wrapping the electrode wires on one of the 1/8" thick versions he cracked it in half. This is the first and only incidence of this that I know about. I have replaced it with a 1/4" version at my expense. All I can say is that I have personally wrapped about 20 of these things without problem and I expect that it may be as simple as my having a lighter touch. In the last day I've also replaced one of the 1/4" towers - it broke in the mail. What the Post office needed to do to make that happen is almost beyond belief. I guess that I'm just saying that things happen and I will always stand behind my products. If you think that you might be very strong or just want to wrap wires really tight - go for the 1/4" towers.

See you next time I fill up - or before if I think of something really profound to say. - Yeah right.

One last thing waterxfuel is soon to become ingitingwater. Watch for it.

Waiting waiting waiting

Today I waited all day long to receive my replacement MAP Enhancer. The Post Office taunts me with their insane tracking method which lets me know that it has arrived in the local station. Yet, I still do not have it! (See me thrumming my fingers on the desk.) Tomorrow is the day. (One can only hope.) Once I have it installed I'll put gas in my half full tank and report the results of having the Electrolyzer and the Oxygen Sensor Spacer in place. My hopes are not high. I did not bother to reset the computer with the disconnect the battery trick. Figured to do that when I put in the new Enhancer. On the other hand, one of my clients gave me new trick (you know who you are but I've forgotten - please write in as a comment to identify yourself - and I'll inform the readers of your ability to provide awesome information). Instead of pulling the the negative cable and leaving it off for 20 to 30 minutes - pull both cables off and touch them together. Reportedly it will do the same reset without the wait. Now, that's great... Thanks to that guy from all of us...

How to assemble the two parts of the tower.

Several people who've purchased the uniquely designed electrolyzer towers from me - have asked how to put the two pieces together, so I've cooked up a little flick (very short) to show just how it's done. When I have a few moments to produce my next extravaganza - I will also upload a video demonstrating how to properly lay in the electrode wires. I hope that this is helpful.

Anyone interested in purchasing towers can just look over at the the sidebar on the right of this blog to see how to do that. Or just write to me at waterxfuel@gmail.com with: how many you want - the thickness you want (1/8 or 1/4 inch) - and the state you live in.

I hate to say this, but...

As I've mentioned before I do feel a desire to lie at times like these. I want this to work. When it does work I'm totally jazzed about it. I don't want to report that I'm having a problem. I want to inflate the figures so that this technology will appear to be working better than the results that I am currently experiencing would indicate, but I'm not going to do it! The reality is what it is. As you can see I got approximately 19.6 MPG. Again this is less than I get with no enhancement of any kind. Am I frustrated? YES! Will I give up? No because the fact is that I've seen it work with my own eyes and I expect to see it again. Clearly, I'm doing something wrong and I will get the information that I need to do it right. I happen to be a very persistent person.

In the light of the above I've posted the following in the W4G forum: Ok now I'm totally baffled. I have the MAP Enhancer installed, and can actually hear the difference when switching between "Factory" and "Enhanced." I have a spacer in the upstream Oxygen sensor. I've reduced the amount of baking soda in the electrolyzer to 3/4 tsp. I've made sure that my vacuum lines are as open as possible (cut back the "T's" and reamed them out) - And my mileage is back to 19 MPG! Remember that without any H.H.O. device I was getting 21 MPG... I don't mind being the guinea pig, but I'm actually wasting fuel at a time when that should be considered to be a sin.

I will post the answers here and I will peruse any viable solution and post those results as well. BTW - I filled the tank before hitting the highway yesterday and the round trip was 22.6 miles. At this point I don't know if there was a gain of any kind, but I just thought I'd let you know that that mileage will be included when I post the next results.

UPDATE (a few hours later): I just received this answer to my query: I hope you don't mind me putting in my $0.27 (inflation). I've followed your posts and you see saw mpg's and frankly, I'm (almost) baffled also. The almost is the reason for this letter. That and the fact that I agree about wasting gas should almost be a crime. Of course, some experimentation is justifyable.

So, the thing is, I have posted about the lids on the H.H.O. units not sealing well, and was wondering if you have checked for this problem?
Remember, though they might have sealed when installed, the plastic lid has a tendancy to warp with heat. I use a water-proof silicone, "Form-A-Gasket", as I feel that it is flexible enough to "warp" with the lid.
As you know, excess air leaking into the jar would have the same effect as a leaky vacuum line, causing a loss of performance and lower mpg.

I so appreciate this guy - a really forthcoming person who is willing to share what he knows. So I just checked my electrolyzer for leaks and what do you know I found one! I am going to take care of that but I do wonder just a bit if it's so much more air leaking in than the bubbler delivers (which admittedly isn't much). We shall see. I continue to wait for other possible answers...

About That Oxygen Sensor Spacer

Yesterday I made a valiant effort to install the thing and only managed to scrape my knuckles badly enough that they still hurt. It turns out that (at least for my car) you need a special wrench to pull the sensor out. My friend (and mechanic), Louie lent me the tool but the results were as stated above. Today I went back over to his shop and asked him to do the task for me - which he did in quick order and refused to accept payment. It took him all of 10 minutes. Experience and having the correct tool - counts.

So as you know I'd already put in the MAP Enhancer. So as a consequence of my failed attempt at installation - I'd already driven 29.4 miles - when the spacer was actually installed. So - I did drive around a bit with that piece of the puzzle missing, but also felt that I was getting a true gain that would show up with the spacer in or not. What happened next was unexpected but it was something that I noticed immediately upon driving out of Louie's shop: my MAP Enhancer needed to be readjusted to a leaner mixture. There was no doubt that something different was going on. It was unmistakable.

My next posting will contain my newest mileage stats, and for the first time they will reflect some highway driving. We intend to take the kayaks out for a spin tomorrow and will need to get to some interesting location - right? At least something more pristine than the East River.

Worst Mileage Ever

That's right this works out to 17.7 MPG. I got 4 miles less per gallon than my car gets all on its own! The reasons are clear and they all come back to me: As I posted earlier I could see that the car was not doing as well as it should - but did I disconnect the negative terminal from the battery for half an hour to let the computer reset again? Nope - I didn't want to deal with having to reset the radio stations and the clock. OMG did that lazy attitude come back to bite me in the behind - especially when I just paid more per gallon than ever. Also, I was waiting for the overwhelming heat to go away so that I could install the MAP Sensor Enhancer, so I didn't go in to fill the tank until that was done - meaning that I paid more and and at the same time had to buy more. Sure I knew the cost of gas was going up - because these days it's always going up. All in all - painful.

On the other hand, I did get the Enhancer installed yesterday. Just to be on the safe side of getting things in order, while I did the installation I did disconnect the battery. There was some mention in the instructions that I got of disconnecting the upstream Oxygen sensor - but I couldn't figure out how to do that other than pulling the electrical line off - which amounts to the same thing. Reason: I want to put the spacer on and I'm waiting until I talk to my mechanic to see if he can tell me how to do that without wrecking it. (I'll report later on that.)

What I did do was get the MAP Enhancer online and working! As you might surmise - I am fairly well proud of myself. Choosing the correct wire seemed a real problem but once I got it - I got it. I can tell that it's doing what it's supposed to do by a very simple test. First I followed the directions for tuning it and found that spot for my car that works best. Then, while the car was sitting at an idle I flicked the setting from Enhanced to Factory. There is a very noticeable difference in the engine. It is unmistakable. I did it right. I expect that that difference will show up the next time I fill up ( and I won't be waiting so long until I do that - because I'm dying to see the results). It's all I can do to keep myself from just going out and driving around, but I'm really not all that willing to demonstrate how stupid I can be:-)

Another thing that I did while I was installing the Enhancer is that I took another look at the "T" connection for the vacuum lines connected to the Electrolyzer - I noticed that one of them appeared to be loose. It was - which certainly may be responsible for the terrible mileage. I just don't know. Still, I took a close look and realized that the Universal T is designed in a way that each end narrows further and further so that it can accept all sizes of lines. What this means is that for my car I had lines that didn't need to be as small at the ends as these were - so I cut them off with wire cutter and reamed them clean with an Exact-o blade. What this should mean is that I will get more vacuum pulling the HHO into the manifold.

I'm realizing more and more that each little thing is important. As always I'm learning at each step and with any luck you will be able to avoid the pitfalls through my missteps.

I'm getting to it...

The fact is that even though I have the equipment I don't have a place in the shade to work in and sad but true the heat is too much to deal with. Out in it for ten minutes and literally felt nauseous! Generally I love the heat, but this is beyond anything. They say that it'll cool down later tonight, so tomorrow looks like the install day. Looked in the package and realized that I'd only ordered 1 Oxygen Sensor Spacer even though I knew I needed 2! Rats. I have the other one on order. I will install the one I have along with putting in the MAP Enhancer. Once I have those on the car I'll go put gas in it and I can tell that I've been wasting gas on this run. Hopefully my mistakes and falters will help the rest of you to avoid those things... Maybe not. Anyway, I'll report again as soon as I get things in order.

And on... and on...

Well, I haven't filled up yet but I can make a pretty good guess that the mileage is not where I want it to be. I do have the MAP Sensor Enhancer in my possession and have spent several days looking at it (it's just my style to do it this way) and rounding up information on how to install it properly. I would have put it on today, but frankly it was just too damned hot out there ( a humid 96 degrees). Maybe tomorrow. Also, I have a couple of Oxygen sensor spacers coming in a day or so (hopefully Monday). Once I've installed everything I'll come back and reveal the mileage from this fill up and will zero out to be ready for the next one... The next one should be the real deal.

By the way I ordered my MAP Enhancer from a guy named Vernon Minton. The link on his name will take you to his website. I wanted to mention that there are people out there who might sell you one of these gadgets for a little less, but this is a guy who went the extra mile to help me to understand how to hook the darned thing up. Certainly a person worth knowing. His work, by the way, has every appearance and feel of the highest quality. Highly recommended.

I'll be back.

Did it Again!

It's a fact! I was able to duplicate my first results which of course lead me to be so persistent in trying to work this technology out. As you can see I traveled 89.4 miles on 3.51 gallons of gas which means I got 25.47 MPG but it's even better than it looks because the last 2 miles or so I was in lots of stand-still traffic in Manhattan and I had the AC on. On top of that the car sat idling (again with the AC on) when some bozo ran into me and tried to drive off. (Everybody's fine) Well, the cops stopped him and I had to fill out all the usual rigmarole papers and blah-blah-blah. Why you ask was the car idling with the AC on? My lovely and beautiful wife Georgina was with me, and she needed it. 'Nuff said?

Anyway this is a real victory. What I want to see now is a consistent gain each and every time. That means that I need to put the MAP sensor on and figure out the oxygen sensor... There is a complexity to this, but I notice that once I get past my hesitation at doing something new - it becomes easy and natural.

If you want to check this technology out for yourself - this is the link

Yes, I do make money when you use the link to buy the books, but I would not encourage you to buy them unless I felt good about the product. Up until now I've felt good about it. Now, I feel great about it.

I encourage anyone to buy the books - buy the parts and begin your own local green revolution. I expect that as time goes on I will figure out how to do even better. I will begin to understand the technology in ways that I've not reached yet. My goals? The same as yours: to be free from Big Oil, to live on a healthy planet, to create a better future for my children.

Oh-Oh Something's Gone Wrong

Based on my commitment to testing this technology in a public way I'm obligated to report that this week things just don't look as good as my first weeks results. Since I was stumped I went to the online forum provided by Water4Gas for us members. What follows is a copy/paste of my communication with them:

My car is a 1997 Honda Civic. I installed the electrolyzer about two weeks ago. As noted in the description I recorded an immediate jump from 21mpg to 26mpg but today when I filled up it was down to 22mpg.-( Also, I'm seeing a much greater loss of water in the unit than I expected: just in this week traveling about 85 miles I lost half the water volume.

One other thing (though I have no idea if this has anything to do with anything) - I did discover that the negative terminal on the unit was slightly loose and I did tighten it up as I refilled with fresh distilled water and baking soda.
Just looking for advice. I've seen the possible results, and I'm totally jazzed about this tech. Now I'm looking for ongoing results that I can feel fully and confidently willing to share with others.
I get it: Water is Fuel,

J

Moderator: [i]sounds like you are making too much heat and boiling the water and injecting steam and not H.H.O.. Lower the baking soda and try again, or make sure the jar is not getting too much heat from the engine as well.[/i]

Me: That makes sense - I think that it must be the baking soda as I'm pretty sure that the jar is fairly well away from engine heat. I'll be making that adjustment first thing in the morning. I've been using a teaspoon of baking soda so I'll go for half that amount and see what happens. I love the combination of art and science. It appeals to me. Thanks so much for the information. I feel encouraged.

Moderator: [i]Also are you using a o2 sensor adjuster and a map adjuster as well?[/i]

Me: The truth is that I've haven't taken either of those steps yet. As it is I bought an assembled unit about two months ago, and didn't do anything with it other that taking it out of the box and looking at it - while I read over the materials. Even though I didn't think that anyone was lying to me I found that I just couldn't believe in any of this until I tested it out for myself, but I didn't want it to be proven false so... Well you see the dilemma that I put myself in:-) As of last week (when I got 26mpg) I began taking steps to gather the other items - so that I can take this thing all the way - and I won't be waiting any two months after I get them to put them to work on my car.

j

If you want to check this technology out for your self - this is the link

The beginning

This a duplicate posting that I originally placed in a blog that I began as a Master's class project titled Narrow Broadcast Technologies. Since that is the actual beginning of this process for me I've created this blog to specifically document my process and progress.
COPY/PASTE BEGINS
I've been researching for a narrative film script that I'm working on with two partners. Our story revolves around a simple alternative to fossil fuels. I came across this a couple of days ago:
Very interesting.

OMG - it's a day later and I've convinced myself! As I looked at what was being offered it became more than interesting to me and I bought the books. I'll be in the process of converting my car (a '97 Honda) over the next few weeks. I'll post updates of my progress in this blog (or I may start another one just for that exploration. (Obviously, I've taken that step - Jon) The more I look at the technology the more I like it. In the meanwhile I've signed on as an affiliate so that others can get the information as well.

Yes, I am skeptical but I would really love to find out that this is the real thing. I've always made decisions based on this idea: If I have the experience of something then I know that it's true. If I have not had the experience I am willing to admit that anything is possible...

If you want to support my experiment and perhaps become as entranced as I have by this 100 year old technology brought up to date - you can begin by

Clicking Here.

So here we go as of day 1 January 31, 2008